(click to enlarge)

KBM-18U Heavy Duty Bevelling Machines

Gullco’s KBM-18® & KBM-18U® Portable, Self-PropelledPlate Edge Bevellers produce clean machined bevelswith no thermal distortion on mild steel, stainless steel andaluminum plate from 6.0 mm to 38 mm thick.Thinner material can be bevelled… consult us for details.The KBM-18U® bevels the underside of plate eliminating the need to flip the work piece...reducing time and cost.Savings are further enhanced when both units are used inapplications where both sides of the material requirebevelling.

Adjustable Undercarriage...For Easy Height Adjustment
The KBM-18® can be purchased with a adjustable height,self-aligning, spring-loaded caster wheel assembly for selfpropelledbevelling along any length of plate maintaining auniform bevel and consistent root face. Undercarriage soldseparate

Angle Bevel Pins...Enable Bevel Angle Adjustment
...KBM-18® units are supplied with angle bevel pins for 221/2°, 30°, 37 1/2°, 45° and 55° bevels. Pins for other bevelangles are available upon request.

KBM-18U Underside Beveling

The KBM-18U is perfect for bevelling theunderside of the plate without need forflipping the work piece over. Incombination with the KBM-18 efficiencyis greatly increased when bevelling boththe top and bottom of the plate. Safety isalso increased as there is no need forconstant maneuvering of heavyworkloads.

Operates at 3 metres per minute

KBM-18® comes complete with the following standard equipment:
1- GBM-18-X1 Deep Tooth Cutter (medium cut)
1- set Bevel Angle Pins for 22 1/2°, 30°, 37 1/2°, 45° and 55°
1- Tool Kit

Specifications

Type for bevelling the under-side of plate

Angle 22 1/2 º   30 º    37 1/2 º   45 º   55 º

Maximum Bevel Width 18.00 mm

Maximum Bevel Depth 15.6 mm

Min. Plate Thickness 6.0 mm

Max. Plate Thickness  38.1 mm

Bevel Speed 304.8 cm/min

Motor 2 HP, 3 phase 415V 50Hz supply

Weight  154 kg

 Download Brochure

Video Clip of a machine operating