| • Weld with Lincoln Chopper Technology. Easy starts, smooth arc, low spatter and excellent bead appearance.
• A Powerful 300 Amp DC Multi-Process Diesel Engine Driven Welder. All rated outputs at 100% duty cycle 104°F (40°C).
• Excellent DC Multi-Process Welding for General Purpose Stick, Downhill Pipe Mode for Stick Welding, TIG, Cored-Wire, MIG (CO2 and Blended Gas) and Arc Gouging with Carbons Up to 5mm in Diameter.
• Enhanced downhill pipe welding mode. Fast travel speeds, especially on fill passes. Arc control adjustment for softer or more forceful, digging arc.
• Voltage sensing arc cutoff in Touch-Start TIG mode when torch is lifted at end of weld.
• Designed Especially for Contractors, Maintenance & Repair, Owner-Operators, and Welding Professionals Who Demand the Best Welding Arc.
• A Portable Powerhouse - Delivers 9,500 Continuous (10,000 Peak) Watts of 120V/240V AC Generator Power. Enough power to run lights, tools, pump and weld all at the same time!
• Fully Enclosed Case for Equipment Protection and Low Noise.
• Approved by Canadian Standards Association (CSA).
• Manufactured under a quality system certified to ISO 9001 requirements.
• Three year Lincoln warranty. (Engine is warranted separately by the manufacturer.) Processes - Stick TIG MIG Flux-Cored Gouging
Physical specifications
Weight:698 lbs. (317 kgs.)
Dimensions (in) HxWxD:35.8 x 21.5 x 52.3
Dimensions (mm) HxWxD:909 x 546 x 1327 Welding Specifications
Rated CC DC Output Amps/Volts/Duty Cycle - 305/29/100%
Rated CV Output Amps/Volts/Duty Cycle - 300/29/100%
Output Range - 20-250A TIG - 20-305A DC - 40-300A Pipe Engine Specifications
Type of Engine - Kubota D722
Cylinders - 3
HP & Speed (rpm) - 18.8@3000
Generator Output - 8000 watts
Fuel Type - Diesel Recommenced Wire Feeders
K428 LN-25
K449 LN-25 w/Contactor & Gas Solenoid
K1870-1 LN-15 Across-the-Arc Model
K1871-1 LN-15 Control Cable Model
K487-25 Magnum SG Spool Gun 25 ft w/Remote
K2259-1 Cobramatic | 
ARC
