Hypertherm POWERMAX 65 SYNC Plasma System
The Powermax 65 Plasma System is a next-generation, professional-grade air plasma cutter that dramatically simplifies system operation for cutting and gouging up to 20 mm (3/4").
Featuring built-in intelligence and a revolutionary single-piece cartridge consumable that provides trackable utilization data.
Powermax SYNC simplifies system operation, streamlines consumable inventory, lowers operating costs, and maximizes performance.
Features:
- Drag cutting/ Fine feature cutting / Flush cutting / Mechanised cutting
- Max removal gouging / Max control gouging
- RFID-enabled SmartSYNC torches and cartridges automatically set the correct amperage and operating mode, eliminating setup errors.
- End-of-life consumable detection eliminates the uncertainty of knowing when to change the cartridge.
- Less operator fatigue when using hand torches with our new flexible lead.
- Cartridge usage data provides valuable insights for improving cutting operations and consumable inventory management.
- Time-saving hand torch controls allow the operator to adjust the amperage on the fly, change cartridges and applications without returning to the power supply.
- SpringStart - consistent starting and a more reliable torch.
Package:
- Power Supply
- Torch
- Work cable
Input voltage, CE: 400 V, 3-PH, 50/60 Hz
Input current @ 9 kW: 15.5/15 A
Output current: 20 - 65 A
Duty cycle @ 40°C (104°F): 50% @ 65 A |
Open circuit voltage (OCV): 400 V CE: 300 VDC
Gas Supply: Clean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate / pressure:
Cutting: 210 l/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi)
Gouging: 210 l/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi)
Input power cable length: 3m
Power supply type: Inverter - IGBT
Engine drive requirement: 15 kW for full 65 A output
Dimensions with handles: 483 mm D; 233 mm W; 430 mm
Weight with 7.6 m torch: 29kg
Warranty: Power supplies have a 3-year warranty and torches a 1-year warranty
Cut capacity
| Capacity | Thickness | Cut speed |
| Recommended | 20 mm (3/4″) | 500 mm/min (20 ipm) |
| 25 mm (1″) | 250 mm/min (10 ipm) | |
| Severance (hand cutting) | 32 mm (1-1/4″) | 125 mm/min (5 ipm) |
| Pierce | 16 mm (5/8″) |
